• Full vehicle hand wash/dry
  • Hand wash using Chemical Guys MaxiSuds II (this will not strip wax and or sealants that’s on the car) using 2 bucket method with grit guards
  • Dried with water and microfiber waffle weave towels (NO WATER BLADES or squeegees are used, which WILL scratch your paint)
• Windows cleaned inside/out
• Interior vacuumed
• Dash dusted and wiped with natural look dressing
• Basic Wax (to keep car protected from elements) (usually Meguiar’s or Collonite wax is used)
• Wheel cleaned
• Tires degreased during wash and dressed after (dressing used is natural look with little gloss, will not sling off,
  • Products used for this: Blackfire Long Lasting Tire Gel, Poorboy's World Bold 'n Bright, Optimum Opti-Bond Tire Gel and couple others.

Ideal for a spruce up between detailing
Completion time: 2-3 hours, can be dropped off in morning and picked up later on in the day

• Full vehicle prep (can take up to 3 hours alone, depending on condition of the car)
  • Degreasing with paint safe citrus degreaser to remove previous protection(wax, sealant, glaze) and expose any covered up defects (product used P21S Total Auto Wash )
  • Hand wash using Chemical Guys Citrus Wash using 2 bucket method with grit guards
  • Dried with water and microfiber waffle weave towels (NO WATER BLADES or squeegees are used, which WILL scratch your paint)
• Full vehicle clayed to remove surface contamination not visible to naked eye but you can definitely feel it if you run your hand on paint after wash. After this paint will feel like glass
• Paint thickness measured with paint thickness gauge.
  • This is necessary to ensure polishing can be performed safely without compromising paint on the car, this can reveal if car was repainted or body work performed that dealer might not told you about)
• Single stage polishing
  • All plastic and rubber trim is taped off before polishing to avoid getting polish on trim
  • This will remove light scratches, holograms and swirls. This might not remove all scratches) (products used for this step vary on type of paint hardness and condition of the paint, Menzerna product is usually used for this step)
• Paint cleansed to remove polishing oils to promote better adhesion and Longevity of sealant and/or wax (without this step, sealant or wax will not adhere to paint and will not last nearly as long (product used: P21S Paintwork Cleanser )
• Sealant (also referred to as superwax, it is polymer based product that lasts a lot longer then usual car wax, protecting car from outside element) (products used for this step Chemical Guys Jetseal 109 or Blackfire Wet Diamond
• Hand wax (mostly used to enhance look of the paint and add extra protection) (products used vary, anything from Meguiar’s wax to Zymol Royale , price will vary depending on wax used)
• Windows cleaned inside/out with ammonia free cleaner which will not harm window tint
• Tires degreased during wash and dressed after final rinse (dressing used is natural look with little gloss, will not sling off,
  • Products used for this: Blackfire Long Lasting Tire Gel, Poorboy's World Bold 'n Bright, Optimum Opti-Bond Tire Gel and couple others.

Ideal for a light use/garage kept car and follow up after first detail, usually needs to be done every 6-12 month depending on car usage, number of washes and storage conditions.
Completion time: 1 day (appointment needed in advance)

• Full vehicle prep (can take up to 3 hours alone, depending on condition of the car)
  • Degreasing with paint safe citrus degreaser to remove previous protection(wax, sealant, glaze) and expose any covered up defects (product used P21S Total Auto Wash )
  • Hand wash using Chemical Guys Citrus Wash using 2 bucket method with grit guards
  • Dried with water and microfiber waffle weave towels (NO WATER BLADES or squeegees are used, which WILL scratch your paint)
• Full vehicle clayed to remove surface contamination not visible to naked eye but you can definitely feel it if you run your hand on paint after wash. After this paint will feel like glass
• Paint thickness measured with paint thickness gauge.
  • This is necessary to ensure polishing can be performed safely without compromising paint on the car, this can reveal if car was repainted or body work performed that dealer might not told you about)
• 2-3 Polishing stages
  • All plastic and rubber trim is taped off before polishing to avoid getting polish on trim
  • This will remove 95% of paint defects (scratches, holograms and swirls. This might not remove all scratches if they are too deep to remove using polishes alone) (products used for this step vary on type of paint hardness and condition of the paint, Menzerna, Meguiar’s product is usually used for this step)
  • To remove deeper scratches will require wetsanding if paint thickness allows it. This included in package 4
• Paint cleansed to remove polishing oils to promote better adhesion and Longevity of sealant and/or wax (without this step, sealant or wax will not adhere to paint and will not last nearly as long (product used: P21S Paintwork Cleanser )
• Sealant (also referred to as superwax, it is polymer based product that lasts a lot longer then usual car wax, protecting car from outside element) (products used for this step Chemical Guys Jetseal 109 or Blackfire Wet Diamond (this sealant requires 24 hour cure time before wax can be applied)
• Hand wax (mostly used to enhance look of the paint and add extra protection) (products used vary, anything from Meguiar’s wax to Zymol Royale , price will vary depending on wax used)
• Windows cleaned inside/out with ammonia free cleaner which will not harm window tint
• Windows treated with Rain-x or similar product
• Wheels cleaned and sealed (wheel sealant is similar to wax for paint, it helps repel brake dust so its easier to clean.
• All exterior trim treated (plastic, chrome, rain guards polished)
• Tires degreased during wash and dressed after final rinse (dressing used is natural look with little gloss, will not sling off,
  • Products used for this: Blackfire Long Lasting Tire Gel, Poorboy's World Bold 'n Bright, Optimum Opti-Bond Tire Gel and couple others.

Our most popular and rewarding package!
Ideal for a first time corrective paint detailing. after this, package 2 is recommended every 6-12 month depending on car use, number of washes and storage conditions.
Completion time: 1-2 days (appointment needed in advance)

• Full vehicle prep (can take up to 3 hours alone, depending on condition of the car)
  • Degreasing with paint safe citrus degreaser to remove previous protection(wax, sealant, glaze) and expose any covered up defects (product used P21S Total Auto Wash )
  • Hand wash using Chemical Guys Citrus Wash using 2 bucket method with grit guards
  • Dried with water and microfiber waffle weave towels (NO WATER BLADES or squeegees are used, which WILL scratch your paint)
• Full vehicle clayed to remove surface contamination not visible to naked eye but you can definitely feel it if you run your hand on paint after wash. After this paint will feel like glass
• Paint thickness measured with paint thickness gauge.
  • This is necessary to ensure polishing can be performed safely without compromising paint on the car, this can reveal if car was repainted or body work performed that dealer might not told you about)
• 3-4 Polishing stages
  • All plastic and rubber trim is taped off before polishing to avoid getting polish on trim
  • This will remove 99.5% of paint defects (scratches, holograms and swirls. This might not remove all scratches if they are too deep to remove using polishes alone) (products used for this step vary on type of paint hardness and condition of the paint, Menzerna, Meguiar’s product is usually used for this step)
  • Deep scratches or defects will be wetsanded if its not completely through clear coat and polished out. You might still see scratch under certain light conditions but it will not be nearly as visible as it was before
• Paint cleansed to remove polishing oils to promote better adhesion and Longevity of sealant and/or wax (without this step, sealant or wax will not adhere to paint and will not last nearly as long (product used: P21S Paintwork Cleanser )
• Sealant (also referred to as superwax, it is polymer based product that lasts a lot longer then usual car wax, protecting car from outside element) (products used for this step Chemical Guys Jetseal 109 or Blackfire Wet Diamond (this sealant requires 24 hour cure time before wax can be applied).
• Hand wax (mostly used to enhance look of the paint and add extra protection) (products used vary, anything from Meguiar’s wax to Zymol Royale , price will vary depending on wax used)
• Windows cleaned inside/out with ammonia free cleaner which will not harm window tint
• Wheels removed (customer approval required) front and back cleaned, if needed front polished (if painted wheels), if there is old wheels adhesive left over its removed. And lastly front and back is sealed (wheel sealant is similar to wax for paint, it helps repel brake dust so its easier to clean.
• Brake calipers degreased/cleaned and sealed
• Windows treated with Rain-x or similar product
• Interior vacuumed (floor mats removed and all carpet and seats vacuumed)
• Interior trim dusted and dressed with natural look dressing that doesn’t leave shine like ArmorAll does which can damage trim), wood drim can be polished if trim permits it.
• All exterior trim treated (plastic, chrome, rain guards polished)
• Tires degreased during wash and dressed after final rinse (dressing used is natural look with little gloss, will not sling off,
  • Products used for this: Blackfire Long Lasting Tire Gel, Poorboy's World Bold 'n Bright, Optimum Opti-Bond Tire Gel and couple others.

Ideal for a classic/show car first time corrective paint detailing. After this, package 2 is recommended every 6-12 month depending on car use, number of washes and storage conditions.
Completion time: 2-3 days (appointment needed in advance)

• Wheels removed
• Front and back sides cleaned
• Clay bared if needed
• Wheel face polished
• Sealed
• Brake calipers degreased/cleaned
• Wheels wells cleaned and treated with undercarriage dressing

• Glass cleaned
• Glass clayed to remove surface contaminations
• Glass polished to remove waterspots
• Rain-x treatment

• Full interior panels cleaned
• Seats wiped down, treated
• All interior panels treated
• Windows treated inside/out
• Full interior/trunk vacuumed
• Deodorized

• Engine fully degreased/cleaned
• All plastic pieces dressed
• All metal pieces repolished and sealed
• Underside of the hood degreased/cleaned

• Top cleaned and treated
• Exposed panels, pieces cleaned and treated with top down

• Exhaust tips/muffler and visible pipes degreased/cleaned
• Treated and polished

• Leather is cleaned
• Leather rejuvenating oils applied (Leather Masters or Leatherique, depending on type of leather your car has) requires couple hours to be absorbed into leather before excess can be removed
• Leather wiped down with cleaning solution to remove excess conditioning oils (Leather Masters or Leatherique brand)